Product Code: JHI-175-150
Availability: In Stock
£5.27
Ex.Vat £4.39

 

Masonry Joist Hanger (One Piece) 200x100mm

 

Product description

The JH / JHI is the traditional timber-masonry hanger range.

The higher side flanges help resist rotation, while the wider masonry top flange spreads the loading over a greater surface area.


Advantages

Higher side flanges help resist rotation, while the wider masonry top flange spreads the loading over a greater surface area.

Makes a major contribution to compliance with air leakage

Installation Requirements

600mm of cured brick/block work above hanger before loading. All hangers for timbers 150mm deep and above are made 10mm undersized for notching, which provides a flush ceiling line.

Material Specification

2.5mm pre galvanised. mild steel to BS EN10142:1991, DX51D + Z600. 

Please Note;Hanger may vary from image depending on area

Click Image Below for technical dat sheet

Masonry Joist Hanger (One Piece) 100x50mm

Write a review

Your Name


Your Review Note: HTML is not translated!

Rating Bad           Good